A validated LC‐MS/MS method for the determination of canagliflozin,a sodium–glucose co‐transporter 2 (SGLT‐2) inhibitor,in a lower volume of rat plasma: application to pharmacokinetic studies in rats

Canagliflozin is a novel, orally selective inhibitor of sodium‐dependent glucose co‐transporter‐2 (SGLT2) for the treatment of patients with type 2 diabetes mellitus. In this study, a validated liquid chromatography–tandem mass spectrometry (LC‐MS/MS) method for the quantitative analysis of canagliflozin in a lower volume of rat plasma (0.1 mL) was established and applied to a pharmacokinetic study in rats. Following liquid–liquid extraction by tert‐butyl methyl ether, chromatographic separation of canagliflozin was performed on a Quicksorb ODS (2.1 mm i.d. × 150 mm, 5 µm size) using acetonitrile–0.1% formic acid (90:10, v/v) as the mobile phase at a flow rate of 0.2 mL/min. The detection was carried out using an API 3200 triple‐quadrupole mass spectrometer operating in the positive electrospray ionization mode. Selected ion monitoring transitions of m/z = 462.0 [M + NH₄]⁺ → 191.0 for canagliflozin and m/z = 451.2 [M + H]⁺ → 71.0 for empagliflozin (internal standard) were obtained. The validation of the method was investigated, and it was found to be of sufficient specificity, accuracy and precision. Canagliflozin in rat plasma was stable under the analytical conditions used. This validated method was successfully applied to assess the pharmacokinetics of canagliflozin in rats using 0.1 mL rat plasma. Copyright © 2016 John Wiley & Sons, Ltd.     

Separation and purification of 99mTc from 99Mo produced by electron linear accelerator

The medical radionuclide ⁹⁹Mo was produced by the ¹⁰⁰Mo(γ,n) reaction using bremsstrahlung photons generated by an electron linear accelerator. The amount of ⁹⁹Mo produced was compared to that predicted by calculation using the particles and heavy ion transport code system. From the ⁹⁹Mo produced, highly pure ^99mTc was separated using the so-called technetium master milker, and the chemical yield of ^99mTc was 83–99 %. The installation of a new complex using this method and the electron linear accelerator with the preferable specification was suggested, and a possibility to supply the demand of ^99mTc was discussed and shown.

     

Synthetic Approach Toward the Partial Sequences of Betaglycan in the Linkage Region on Solid Support and in Solution Phase

We have synthesized, for the first time, the partial sequence of the betaglycan composed of the tetraosyl hexapeptide, which was directly usable as a probe for enzymatic glycosyl transfer. Stepwise elongation afforded the corresponding tetraosyl trichloroacetimidate. The common glycosyl dipeptide:[β‐d‐GlcA‐(1→3)‐β‐d‐Gal‐(1→3)‐β‐d‐Gal‐(1→4)‐β‐d‐Xyl‐(1→O)‐Ser‐Gly] was synthesized by glycosylation of the corresponding tetraosyl trichloroacetimidate and Ser‐Gly moiety. The glycosyl dipeptide was coupled with other core peptide parts in solution phase and on a solid support. These glycosyl hexapeptides were then transformed into the desired target compounds.     

Development of continuous process enabling nanofibrillation of pulp and melt compounding

Microfibrillated cellulose (MFC), a mechanically fibrillated pulp mostly consisting of nanofibrils, is a very attractive material because of its high elastic modulus and strength. Although much research has been done on composites of MFC and polypropylene (PP), it has been difficult to produce such composites at an industrial level because of the difficulties in using MFC in such composites are not only connected to the polarity (that can be improved with compatibilizers), but also with the challenge to make a homogeneous blend of the components, and also the low temperature stability of cellulose that could cause problems during processing. We developed a new processing method which enables continuous microfibrillation of pulp and its melt compounding with PP. Never-dried kraft pulp and powdered PP were used as raw materials to obtain MFC by kneading via a twin-screw extruder. Scanning electron microscopy showed nano to submicron wide fibers entangled in the powdered PP. MFC did not aggregate during the melt compounding process, during which the water content was evaporated. Maleic anhydride polypropylene (MAPP) was used as a compatibilizer to reinforce interfacial adhesion between the polar hydroxyl groups of MFC and non-polar PP. We investigated the effect of MAPP content on the mechanical properties of the composite, which were drastically improved by MAPP addition. Needle-leaf unbleached kraft pulp (NUKP)-derived MFC composites had better mechanical properties than needle-leaf bleached kraft pulp (NBKP)-derived MFC composites. Injection molded NUKP-derived MFC composites had good mechanical and thermal properties. The tensile modulus of 50 wt% MFC composite was two times, and the tensile strength 1.5 times higher than that of neat PP. The heat distortion temperature of 50 wt% MFC content composite under 1.82 MPa flexural load was increased by 53 °C, from 69 to 122 °C. This newly developed continuous process using powder resin has the potential for application at an industrial level.     

Open-sandwich immunoassay for sensitive and broad-range detection of a shellfish toxin gonyautoxin

At present, the analytical method for paralytic shellfish poisoning (PSP) toxins in shellfish is the mouse bioassay (MBA), which is an official method of the Association of Analytical Communities (AOAC [8]). However, the low sensitivity and concerns over the number of live animals required for testing have been cited as the major reason for seeking its replacement. In this report, we employed an open-sandwich immunoassay (OS-IA) to detect gonyautoxin (GTX2/3), a kind of PSP toxins. OS-IA, which utilizes the antigen-induced enhancement of antibody V_H/V_L interaction, can measure a small molecule antigen in a noncompetitive format. Hence it has a wider working range and shorter measurement time. We isolated anti-GTX2/3 antibody gene from a hybridoma GT-13A by screening a Fab-displaying phage library. Then the vectors for OS-IA were constructed, and examined for antigen concentration-dependency of the V_H/V_L interaction by OS-ELISA. As a result, in each case, signal intensity increases notably in a wide concentration range (0.1 to >1000 ng mL⁻¹) of free GTX2/3, which was enough to cover its regulation value (80 μg 100 g⁻¹) in many countries. So OS-IA will be widely applicable to detect PSP toxins in shellfish meats and in drinking water.     

Thermal oxidative degradation of additive-free polypropylene pellets investigated by multichannel Fourier-transform chemiluminescence spectroscopy

Thermal oxidative degradation of additive-free polypropylene pellets heated isothermally in dry air at 150 and 180 °C (below and above the melting point of 163 °C) was investigated by multichannel Fourier-transform chemiluminescence spectroscopy. The initial peak wavelength of chemiluminescence emission at 490 nm remained constant during the early stages of thermal degradation, but new emissions developed with time in the red spectral region over an extended oxidation period. The time-dependent luminescence spectra were deconvoluted into three emission bands by least-squares fitting using Gaussian curves. We concluded that at least three groups of luminescent species (luminophores), having different conjugation lengths, were generated by thermal oxidation over extended periods and show luminescence around 490, 660, and 740 nm.     

Fast and Robust Nanocellulose Width Estimation Using Turbidimetry

The dimensions of nanocelluloses are important factors in controlling their material properties. The present study reports a fast and robust method for estimating the widths of individual nanocellulose particles based on the turbidities of their water dispersions. Seven types of nanocellulose, including short and rigid cellulose nanocrystals and long and flexible cellulose nanofibers, are prepared via different processes. Their widths are calculated from the respective turbidity plots of their water dispersions, based on the theory of light scattering by thin and long particles. The turbidity‐derived widths of the seven nanocelluloses range from 2 to 10 nm, and show good correlations with the thicknesses of nanocellulose particles spread on flat mica surfaces determined using atomic force microscopy.

     

Production of 99Mo/99mTc by photonuclear reaction using a natMoO3 target

Journal of Radioanalytical and Nuclear Chemistry - Amount estimation of production of 99Mo required for medical applications was carried out by utilizing an electron linear accelerator with...